Important Information about Welding Equipment

Welding is the process of fastening two or more pieces of metal together using heat and pressure. Heat is used to soften the material while adequate pressure allows the two materials to affix together as one in a joint. The concept of welding developed in the middle ages, although it did not form into the current welding process until the 19th century. Before this, forge welding was the only means of joining two pieces of metal together. Forge welding was replaced during the industrial revolution after the introduction of gas and electric flame heating methods. Today, welders specialize in many areas of employment including pipe welding, automobile welding, machinery, among other sectors. To ensure that the entire welding process flows smoothly, the right welding tools and equipment must be available. Here are essential details about some of the commonly used Welding Equipment.

Welding Electrodes

Welding electrodes can be classified into three major categories: stick welding electrodes, MIG welding electrodes, and TIG welding electrodes. Stick welding electrodes are melted to create a weld joint. The most popular stick welding electrode is E6010. Others include the E7018, E6013, and E6011. MIG welding electrodes are generally thin wires that are fed through the welding torch. These wires have a thickness ranging from 0.45, 0.35, 0.30 and 0.23. TIG welding electrodes are non-consumable electrodes that come in five main varieties. Lanthanated and created electrodes are the most commonly used in TIG welding. Thoriated electrodes are avoided by most welders since they require a respirator and emit radiations.

Welding Clamps

Welding clamps are used for keeping a welded joint line up properly. If a work-piece shifts, the weld could be crooked, resulting in loss of time and resources if it has to be welded again. Using many clamps can help to make the welding process easier and faster.

Angle Grinders

An angle grinder is a portable tool that has the arbor at 90 degrees in relation to the tool. It is used to prepare metal before welding, especially in TIG and MIG welding. Depending on their size, angle grinders vary from 500 to 2500 watts. Choosing an angle grinder with enough power can ensure that metal is cleaned sufficiently before welding.

These are just some of the commonly used Welding Equipment. For additional details about welding tools and equipment and how to contact a reputable supplier, go to

Like us on Facebook.

Be the first to like.

Be Sociable, Share!

    Author: anvdiribrt

    Share This Post On

    Submit a Comment

    Your email address will not be published. Required fields are marked *

    one × 4 =