7 Sprinkler Pump Troubleshooting Tips

Keep your garden in tip-top shape with well-functioning sprinklers. If yours aren’t working properly, you may want to need to troubleshoot the pumps again.

Turn off the circuit breaker

Do this before you troubleshoot the pumps. Use a non-contact voltage tester to find out, the SFGate says.

Look for the pump

This is usually located near the main water supply. You may find this along a wall.

Check for damage

Inspect the pump’s exterior electrical connections. Are there any loose wires? You’ll want to fix those. A pair of needle nose pliers will come in handy here.

Look for cracks

Are there any cracks on the pump’s exterior? If you see any cracks, repairs aren’t going to do much good. You’ll need to consider putting an order for a new sprinkler pump in Miami. Cracks will compromise the efficiency of the unit and result in poor water flow.

Clean the debris out

Check the pump’s housing for debris. Clear them out. Sediments that enter the pump’s housing can deal damage to the pump’s moving parts like the impeller so a bit of cleaning can save you a lot of headaches and hassles.

Check the plugs

Cracked pumps aren’t the only thing you need to replace. Before you buy a new sprinkler pump in Miami, look at the pump’s plugs. Are the housings cracked or leaking? Then you’ll need to replace the plugs as well. Order all the items you need at once to make for an easier and more convenient time.


Consider upgrading to a new pump system. This is a sound option, especially if you’re using an outdated pump. If you’ve added more valves and irrigation tubing to your watering system, then your old pump may not be powerful enough to handle those additions. Upgrade to a new and more powerful option.

Be the first to like.

Be Sociable, Share!

    Author: anvdiribrt

    Share This Post On

    Submit a Comment

    Your email address will not be published. Required fields are marked *

    twenty − sixteen =